Jump to content
Sign in to follow this  
Lucek™

[SOFTCAM] NCam 1.9-r1 (oficial)

Recommended Posts

NCam jest emulatorem skompilowanym na bazie modułów OSCama Opis by kastor777

 

 

New Ncam 1.2 Compiled by marouan:

 

VIACCESS:

 

Entitle providers present on card that dont have any classes

Some code cosmetics

 

Fix regression introduced (fake class 0 on provider with valid classes)

 

Tandberg -ecm-emm fix

 

fix for new tandberg algo:

-ECM_TAG_CW_DESCRIPTOR: add new tag 0xED

-EMM_TAG_SECURITY_TABLE_DESCRIPTOR E4: add new mode 0x01

-EMM_TAG_EVENT_ENTITLEMENT_DESCRIPTOR E1: add new mode 0x01

 

 

add validity check for new ECM keys

 

 

 

ncamfoto.jpg

 

 

Instalacja NCam (Mipsel, sh40):

 

/usr/bin/ Ncam (binarka - atrybut 755)

 

/var/tuxbox/config/ ncam.user, ncam.server, ncam.conf

Możemy również dodać pliki dla usprawnienia działania NCam : ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist

 

Gdyby emulator nie działał w danym image należy sprawdzić czy są zainstalowanowe biblioteki:

/usr/lib/ libpcsclite.so.1, libpcsclite.so.1.0.0 (atrybut 755) do pobrania binarki NCam 1.2

 

 

 

build-mipsel (Gigablue-Dream-VU+-Xtrend-Formuler.....):

http://www.mediafire.com/file/gphchb1akbv4z32/build-mips%28Gigablue-Dream-VU+-Xtrend-Formuler.....%29%282%29.rar

 

 

build-mips (Tiviar plus and similar):

http://www.mediafire.com/file/kktki8sifj9l1rz/build-mips%28Tiviar+plus+and+similar%29.rar

 

 

build-mips-router (Routers Mipsel DD-WRT):

http://www.mediafire.com/file/48c3st3c44kml71/build-mips-router%28Routers+Mipsel+DD-WRT%29.rar

 

 

build-sh4 (Golden Media-Galaxy innovations-Amiko....):

http://www.mediafire.com/file/3n7i88h71u02t14/build-sh4%28Golden+Media-Galaxy+innovations-Amiko....%29.rar

 

build-x86-Linux-pc (32bit-i686):

http://www.mediafire.com/file/aeo03su3i3fwfr0/build-x86-Linux-pc%2832bit-i686%29.rar Uwaga zmnienić nazwy confingów Oscama

Share this post


Link to post
Share on other sites

NCam-1.2-r3 (Oficial)

 

 

No esperaba tener que sacar una nueva versión tan pronto jeje, pero un fallito de última hora me ha tenido en vela más de lo que debía.

 

Aquí os dejo la versión de NCam 1.2-r3 (oficial), espero que sea todo de vuestro agrado.

 

Recordaros que para unas cervecitas por paypal no me voy a negar :P

 

If you want to invite me to a beer: https://www.paypal.me/Javilonas

 

 

Adjunto el changelog:

 

#########################################################################


NCam cardserver v1.2-r3, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
Visit https://www.lonasdigital.com/ for more details.
Source Code: https://github.com/javilonas/NCam
#########################################################################


************************************************************************
Important notice !!

This is the OFFICIAL version (20.3.2017)
There are no later versions.

If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions, 
we are not responsible for those versions or what their authors may have added.

Signed: Javier Sayago (Javilonas)
************************************************************************


Compiled:


ncam.mips                   Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc            Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                    Linux PC (32 bit - i686).
ncam.x86_64                 Linux PC (64 bit).
ncam.ppc                    Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                    Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon    Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian           ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips            Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe             Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


************************************************************************


Changelog v1.2-r3:


- Fix Cuts every 10 seconds and pixelations for CAIDs 09C4 and 098C.


--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal without its corresponding suscription. 
You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me to a beer: https://www.paypal.me/Javilonas

Share this post


Link to post
Share on other sites

NCam-1.4-r0 (Oficial)

 

 

Aquí os dejo la versión de NCam 1.4-r0 (oficial), espero que sea todo de vuestro agrado.

 

Recordaros que para unas cervecitas por paypal no me voy a negar :P

 

If you want to invite me for a beer: https://www.paypal.me/Javilonas

 

 

Adjunto el changelog:

 

#########################################################################


NCam cardserver v1.4-r0, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
Visit https://www.lonasdigital.com/ for more details.
Source Code: https://github.com/javilonas/NCam


#########################################################################


**********************************************************************************************
Important notice !!

This is the OFFICIAL version (02.04.2017)
There are no later versions.

If you have downloaded any version, listed as 1.5, 1.6, 1.7, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions, 
we are not responsible for those versions or what their authors may have added.

Signed: Javier Sayago (Javilonas)
***********************************************************************************************


Compiled:


ncam.mips                         Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                  Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                          Linux PC (32 bit - i686).
ncam.x86_64                       Linux PC (64 bit).
ncam.ppc                          Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                      Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                          Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon          Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                 ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android                  ARM (For all api android).
ncam.arm-marvell                  ARM (Synology DS114, DS214 and similar).
ncam.arm-mca                      ARM (For Matrix CAM Air).
ncam-router.mips                  Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips   Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe                   Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.


Change serverip 192.168.xx.xx for the ip of the receiver.


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


***********************************************************************************************


Changelog v1.4-r0:


- Added support for stapi5.
- New config somewhat more globalized (If you have cuts, adjust the config to your needs).
- Increased values of ECM_FMT_LEN, CXM_FMT_LEN, and MAX_ATR_LEN.
- Compiled with new FLAGS to avoid problems in 4k architectures.


--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal without its corresponding suscription. 
You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me for a beer: https://www.paypal.me/Javilonas

 

Si me he olvidado de algo o hay algún problema de última hora, se arreglará en la próxima versión.

 

 

:download:

 

NCam_1.4-r0.ZIP

Share this post


Link to post
Share on other sites

NCam-1.5-r0 (Oficial)

 

 

Aquí os dejo la versión de NCam 1.5-r0 (oficial), espero que sea todo de vuestro agrado.

 

Recordaros que para unas cervecitas por paypal no me voy a negar :P

 

If you want to invite me for a beer: https://www.paypal.me/Javilonas

 

 

Adjunto el changelog:

 

#########################################################################


NCam cardserver v1.5-r0, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
Visit https://www.lonasdigital.com/ for more details.
Source Code: https://github.com/javilonas/NCam


#########################################################################


**********************************************************************************************
Important notice !!

This is the OFFICIAL version (04.04.2017)
There are no later versions.

If you have downloaded any version, listed as 1.6, 1.7, etc ... These are FAKE versions.
Be very careful when downloading non OFFICIAL versions, 
we are not responsible for those versions or what their authors may have added.

Signed: Javier Sayago (Javilonas)
***********************************************************************************************


Compiled:


ncam.mips                         Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                  Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                          Linux PC (32 bit - i686).
ncam.x86_64                       Linux PC (64 bit).
ncam.ppc                          Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                      Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                          Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon          Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                 ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android                  ARM (For all api android).
ncam.arm-marvell                  ARM (Synology DS114, DS214 and similar).
ncam.arm-mca                      ARM (For Matrix CAM Air).
ncam-router.mips                  Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips   Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe                   Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686.exe                     Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.


Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


***********************************************************************************************


Changelog v1.5-r0:


- Added support for i686.exe.
- Added NodeID generator to CCcam.
- Fixed issue reported on new options in loadbalanced.
- Small arrangements in the webif in different areas (little appreciable).


--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal without its corresponding suscription. 
You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me for a beer: https://www.paypal.me/Javilonas




 

Como siempre digo, si me he olvidado de algo o hay algún problema de última hora, se arreglará en la próxima versión.

 

Un cordial saludo

 

 

 

 

:download:

 

NCam_1.5-r0.rar

Share this post


Link to post
Share on other sites

NCam 1.7-r4 (oficial)

 

 

Aquí os dejo la versión de NCam 1.7-r4 (oficial), espero que sea todo de vuestro agrado.

 

Recordaros que para unas cervecitas. tabaco o café no me voy a negar: https://www.paypal.me/Javilonas

 

 

Adjunto el changelog:

 

#########################################################################


NCam cardserver v1.7-r4, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2018 developed by Javier Sayago (Javilonas).
Visit https://www.lonasdigital.com/ for more details.
Source Code: https://github.com/javilonas/NCam


#########################################################################


**********************************************************************************************
Important notice !!

This is the OFFICIAL version (06.03.2018)
There are no later versions.

If you have downloaded any version, listed as 1.8, 1.9, 2.x, 3.x 4.x, etc ... These are FAKE versions.
Be very careful when downloading non OFFICIAL versions, 
we are not responsible for those versions or what their authors may have added.

The "Mod" versions that do not show their changes publicly go against the GPL-3.0 license.
License NCam: https://github.com/javilonas/NCam/blob/master/COPYING

Signed: Javier Sayago (Javilonas)
***********************************************************************************************


Compiled:


ncam.mips                         Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                  Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                          Linux PC (32 bit - i686).
ncam.x86_64                       Linux PC (64 bit).
ncam.ppc                          Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                      Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                          Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon          Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                 ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android                  ARM (For all api android).
ncam.arm-marvell                  ARM (Synology DS114, DS214 and similar).
ncam.arm-mca                      ARM (For Matrix CAM Air).
ncam-router.mips                  Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips   Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe                   Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686.exe                     Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.


Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


***********************************************************************************************


Changelog v1.7-r4:


- WebIf: show unauthorised access in ncam log.
- Fix for received CW has invalid checksum when CCcam own Node Id > 7FFFFFFFFFFFFFFF.
- When received CWs are different the logged warning contains wrong reader details.
- DVBAPI: parse pmtpid also for PC clients.
- Update a value to specific 15.
- ECM doublecheck is broken.
- CCcam 2.3.1 Support.
- Change CLOCKFIX default to disabled.
- Allow set demux for reader.
- Update EMU.
- Support for VideoGuard Sky Caid 098D.
- Add Max pids for extended CWs.
- Fix for Jet.
- Increase in the value of the maximum EMM / ECM size allowed.


--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal without its corresponding suscription. 
You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me for a beer: https://www.paypal.me/Javilonas






 

Como siempre digo, si me he olvidado de algo o hay algún problema de última hora, se arreglará en la próxima versión.

 

Un cordial saludo

 

Descarga por Mega: https://mega.nz/#!3JgTkIzS!XhHd5cXSRvI1uS-PnSC05vORKb9HP3zRcTpFxioHpls

 

 

 

 

 

 

:download:

 

NCam_1.7-r4 .rar 25.0 MB

enigma2-softcams-ncam-all-images_1.7-r4_arm-mips_all.ipk

Share this post


Link to post
Share on other sites

NCam 1.9-r1 (oficial)

 

 

Aquí os dejo la versión de NCam 1.9-r1 (oficial)

 

Adjunto el changelog:

 

#########################################################################


NCam cardserver v1.9-r1, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2018 developed by Javier Sayago (Javilonas).
Visit https://www.lonasdigital.com/ for more details.
Source Code: https://github.com/javilonas/NCam


#########################################################################


**********************************************************************************************
Important notice !!

This is the OFFICIAL version (13.03.2018)
There are no later versions.

If you have downloaded any version, listed as 2.x, 3.x 4.x, 5.x etc ... These are FAKE versions.
Be very careful when downloading non OFFICIAL versions, 
we are not responsible for those versions or what their authors may have added.

The "Mod" versions that do not show their changes publicly go against the GPL-3.0 license.
License NCam: https://github.com/javilonas/NCam/blob/master/COPYING

Signed: Javier Sayago (Javilonas)
***********************************************************************************************


Compiled:


ncam.mips                         Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                  Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                          Linux PC (32 bit - i686).
ncam.x86_64                       Linux PC (64 bit).
ncam.ppc                          Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                      Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                          Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon          Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                 ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android                  ARM (For all api android).
ncam.arm-marvell                  ARM (Synology DS114, DS214 and similar).
ncam.arm-mca                      ARM (For Matrix CAM Air).
ncam-router.mips                  Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips   Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe                   Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686.exe                     Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.


Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


***********************************************************************************************


Changelog v1.9-r1:


- Support for CCcam 2.3.2.
- Fix Card Tivusat.


--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal without its corresponding suscription. 
You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me for a beer: https://www.paypal.me/Javilonas

 

Como siempre digo, si me he olvidado de algo o hay algún problema de última hora, se arreglará en la próxima versión.

 

Un cordial saludo

 

Descarga por Mega: https://mega.nz/#!3JgTkIzS!XhHd5cXSRvI1uS-PnSC05vORKb9HP3zRcTpFxioHpls

 

 

 

 

 

 

:download:

 

NCam_1.9-r1 .rar 24.2 MB

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.