Jump to content
Na forum sat-4-all.com obowiązuje bezwzględny zakaz oferowania sharingu oraz umieszczania linków do treści łamiących prawa autorskie.
Sign in to follow this  
rybak02

Nbox - brak jednej głowicy i strojenie nie udane

Recommended Posts

Witam.

Mam problem z tunerem BSLA.

W ustawieniach widać tylko jedną głowicę, na dodatek cały czas pojawia się komunikat strojenie nie udane.

 

Głowica jest w 100% sprawna, testowana w drugim dekoderze. Głowica z drugiego dekodera nie działa.

 

Wymienione wszystkie kondensatory na płycie. Stare kondensatory w pełni sprawne - zmierzone miernikiem.

 

Testowane na sofcie openpli 8.6

 

W załączniku log z openPLi 8.2

 

Czy coś jest źle skonfigurowane?

Jakieś sugestie?

 

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.11.04 16:54:25 =~=~=~=~=~=~=~=~=~=~=~=


Board: Nbox  [29-bit mode] by FREEBOX


U-Boot 1.3.1 (Nov  7 2011 - 15:35:30) - stm23_0053

DRAM:  128 MiB
NOR:     4 MiB
NAND:   64 MiB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  2  1  0 

NAND read: device 0 offset 0x3c00000, size 0x300000


Reading data from 0x3c00000 --   0% complete.
Reading data from 0x3c07a00 --   1% complete.
Reading data from 0x3c0f400 --   2% complete.
Reading data from 0x3c17000 --   3% complete.
Reading data from 0x3c1ea00 --   4% complete.
Reading data from 0x3c26600 --   5% complete.
Reading data from 0x3c2e000 --   6% complete.
Reading data from 0x3c35c00 --   7% complete.
Reading data from 0x3c3d600 --   8% complete.
Reading data from 0x3c45000 --   9% complete.
Reading data from 0x3c4cc00 --  10% complete.
Reading data from 0x3c54600 --  11% complete.
Reading data from 0x3c5c200 --  12% complete.
Reading data from 0x3c63c00 --  13% complete.
Reading data from 0x3c6b800 --  14% complete.
Reading data from 0x3c73200 --  15% complete.
Reading data from 0x3c7ae00 --  16% complete.
Reading data from 0x3c82800 --  17% complete.
Reading data from 0x3c8a200 --  18% complete.
Reading data from 0x3c91e00 --  19% complete.
Reading data from 0x3c99800 --  20% complete.
Reading data from 0x3ca1400 --  21% complete.
Reading data from 0x3ca8e00 --  22% complete.
Reading data from 0x3cb0a00 --  23% complete.
Reading data from 0x3cb8400 --  24% complete.
Reading data from 0x3cbfe00 --  25% complete.
Reading data from 0x3cc7a00 --  26% complete.
Reading data from 0x3ccf400 --  27% complete.
Reading data from 0x3cd7000 --  28% complete.
Reading data from 0x3cdea00 --  29% complete.
Reading data from 0x3ce6600 --  30% complete.
Reading data from 0x3cee000 --  31% complete.
Reading data from 0x3cf5c00 --  32% complete.
Reading data from 0x3cfd600 --  33% complete.
Reading data from 0x3d05000 --  34% complete.
Reading data from 0x3d0cc00 --  35% complete.
Reading data from 0x3d14600 --  36% complete.
Reading data from 0x3d1c200 --  37% complete.
Reading data from 0x3d23c00 --  38% complete.
Reading data from 0x3d2b800 --  39% complete.
Reading data from 0x3d33200 --  40% complete.
Reading data from 0x3d3ae00 --  41% complete.
Reading data from 0x3d42800 --  42% complete.
Reading data from 0x3d4a200 --  43% complete.
Reading data from 0x3d51e00 --  44% complete.
Reading data from 0x3d59800 --  45% complete.
Reading data from 0x3d61400 --  46% complete.
Reading data from 0x3d68e00 --  47% complete.
Reading data from 0x3d70a00 --  48% complete.
Reading data from 0x3d78400 --  49% complete.
Reading data from 0x3d7fe00 --  50% complete.
Reading data from 0x3d87a00 --  51% complete.
Reading data from 0x3d8f400 --  52% complete.
Reading data from 0x3d97000 --  53% complete.
Reading data from 0x3d9ea00 --  54% complete.
Reading data from 0x3da6600 --  55% complete.
Reading data from 0x3dae000 --  56% complete.
Reading data from 0x3db5c00 --  57% complete.
Reading data from 0x3dbd600 --  58% complete.
Reading data from 0x3dc5000 --  59% complete.
Reading data from 0x3dccc00 --  60% complete.
Reading data from 0x3dd4600 --  61% complete.
Reading data from 0x3ddc200 --  62% complete.
Reading data from 0x3de3c00 --  63% complete.
Reading data from 0x3deb800 --  64% complete.
Reading data from 0x3df3200 --  65% complete.
Reading data from 0x3dfae00 --  66% complete.
Reading data from 0x3e02800 --  67% complete.
Reading data from 0x3e0a200 --  68% complete.
Reading data from 0x3e11e00 --  69% complete.
Reading data from 0x3e19800 --  70% complete.
Reading data from 0x3e21400 --  71% complete.
Reading data from 0x3e28e00 --  72% complete.
Reading data from 0x3e30a00 --  73% complete.
Reading data from 0x3e38400 --  74% complete.
Reading data from 0x3e3fe00 --  75% complete.
Reading data from 0x3e47a00 --  76% complete.
Reading data from 0x3e4f400 --  77% complete.
Reading data from 0x3e57000 --  78% complete.
Reading data from 0x3e5ea00 --  79% complete.
Reading data from 0x3e66600 --  80% complete.
Reading data from 0x3e6e000 --  81% complete.
Reading data from 0x3e75c00 --  82% complete.
Reading data from 0x3e7d600 --  83% complete.
Reading data from 0x3e85000 --  84% complete.
Reading data from 0x3e8cc00 --  85% complete.
Reading data from 0x3e94600 --  86% complete.
Reading data from 0x3e9c200 --  87% complete.
Reading data from 0x3ea3c00 --  88% complete.
Reading data from 0x3eab800 --  89% complete.
Reading data from 0x3eb3200 --  90% complete.
Reading data from 0x3ebae00 --  91% complete.
Reading data from 0x3ec2800 --  92% complete.
Reading data from 0x3eca200 --  93% complete.
Reading data from 0x3ed1e00 --  94% complete.
Reading data from 0x3ed9800 --  95% complete.
Reading data from 0x3ee1400 --  96% complete.
Reading data from 0x3ee8e00 --  97% complete.
Reading data from 0x3ef0a00 --  98% complete.
Reading data from 0x3ef8400 --  99% complete.
Reading data from 0x3effe00 -- 100% complete.
3145728 bytes read: OK
## Booting image at a5000000 ...
  Image Name:   Linux-2.6.32.59_stm24_0211
  Image Type:   SuperH Linux Kernel Image (gzip compressed)
  Data Size:    1955387 Bytes =   1.9 MiB
  Load Address: 84001000
  Entry Point:  84002000
  Verifying Checksum ... OK
  Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:00:03:99:44:55:03 init=/bin/devinit - 0x00000000 - 0 ...


INIT: version 2.86 booting

Mount /dev in tmpfs
Copying device nodes to /dev
init autofs4
init frontpanel
boxtype BXZB
link frontend dvbt
init Fan
Starting DEBUG Interface
Mounting local filesystems...
Cleaning /tmp /var/run.
Hostname: nbox.
starting telnetd
init stmfb
VIDEO:hdmi_component
LOADING MODULES
load a/v firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 432c0
seeking to 59878
seeking to 598b0
seeking to 598e8
seeking to 5f3d8
seeking to 5f3e4
seeking to 5f3f0
seeking to 62664
seeking to 64700
init embx
init AVS
init player
init frontends dvb-s
init drivers
init CEC
VIDEO:hdmi_component
init smartcard
init lircd
lircd-0.9.0[521]: lircd(default) ready, using /var/run/lirc/lircd

Model: nbox
vBoxType: 13
Input device name: "TDT RC event driver"
Starting portmap daemon...Selected Remote: NBOX RemoteControl
RemoteControl Map: E2 code
Supports Long KeyPress: 0
lircd-0.9.0[521]: accepted new client on /var/run/lirc/lircd

.
Starting FTP server: vsftpd.
Sat Dec 12 20:00:00 CET 1970
Start networking
USB Serial port
Mount and Swap
Start SOFTCAM
Load E2
Reconfiguring network interfaces... [sCRIPT] start: oscam8647 lite sci0
showSinglePic /boot/logo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
ifdown: interface lo not configured
ifdown: interface ra0 not configured
ifdown: interface eth0 not configured
Initializing interface 'ra0' conf '/etc/wpa_supplicant.ra0.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.ra0.conf' -> '/etc/wpa_supplicant.ra0.conf'
Reading configuration file '/etc/wpa_supplicant.ra0.conf'
Initializing interface (2) 'ra0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
ioctl[sIOCSIWPMKSA]: No such device
ioctl[sIOCSIWMODE]: No such device
Could not configure driver to use managed mode
ioctl[sIOCGIFFLAGS]: No such device
Could not set interface 'ra0' UP
ioctl[sIOCGIWRANGE]: No such device
WEXT: Operstate: linkmode=1, operstate=5
ioctl[sIOCGIFINDEX]: No such device
Failed to add interface ra0
State: DISCONNECTED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[sIOCSIWENCODEEXT]: No such device
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[sIOCSIWENCODE]: No such device
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[sIOCSIWENCODEEXT]: No such device
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[sIOCSIWENCODE]: No such device
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[sIOCSIWENCODEEXT]: No such device
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[sIOCSIWENCODE]: No such device
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[sIOCSIWENCODEEXT]: No such device
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[sIOCSIWENCODE]: No such device
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
ioctl[sIOCSIWAUTH]: No such device
WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
wpa_driver_wext_set_drop_unencrypted
ioctl[sIOCSIWAUTH]: No such device
WEXT auth param 5 value 0x0 - wpa_driver_wext_set_countermeasures
ioctl[sIOCSIWAUTH]: No such device
WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
ioctl[sIOCSIWAP]: No such device
WEXT: Operstate: linkmode=0, operstate=6
ioctl[sIOCGIFFLAGS]: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFADDR: No such device
route: SIOCADDRT: No such device
udhcpc (v1.19.3) started
Sending discover...
Sending discover...
Sending discover...
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k total video mem
4188k usable video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
couldn't open LCD - load lcd.ko!
lcd buffer 0x75a8d8 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[font] initializing lib...
[font] loading fonts...
[font] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is a remotecontrol
Input device "NBOX frontpanel buttons" is a remotecontrol
failed to open /dev/input/event2
Input device "" is a mouse
failed to open /dev/input/event3
Input device "" is a remotecontrol
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
[sERVERSOCKET] ERROR on bind() (Address already in use)
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
failed...
No lease, failing
done.
loaded 3818 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
opening frontend 2
failed! (/dev/dvb/adapter0/frontend2) No such device
boxtype detection BOX_SH4

found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 6
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
sh: 83: unknown operand
sh: 6: unknown operand
sh: 5: unknown operand
sh: b: unknown operand
sh: c: unknown operand
sh: e: unknown operand
sh: f: unknown operand
sh: 7: unknown operand
MOUNT: No such device
Swap...
Swap_file HDD OFF
Failed to open /dev/dbox/fp0
NBOX detected!
[Harddisk] enumerating block devices...
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STB0899 Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  single
sec config completed
[infoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/home/root/resumepoints.pkl'
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.nc_25062014_1341.tv 1
462 entries in Bouquet userbouquet.nc_25062014_1341.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 463
202 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 665
390 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 1046
62 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 1108
182 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1283
210 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1486
85 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1564
88 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1646
45 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.3dtv.tv 1690
8 entries in Bouquet userbouquet.3dtv.tv
loading bouquet... /etc/enigma2/userbouquet.ppv___vod.tv 1696
25 entries in Bouquet userbouquet.ppv___vod.tv
loading bouquet... /etc/enigma2/userbouquet.polskie_hd.tv 1720
154 entries in Bouquet userbouquet.polskie_hd.tv
loading bouquet... /etc/enigma2/userbouquet.nc_.tv 1874
163 entries in Bouquet userbouquet.nc_.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 2037
174 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe11.tv 2210
74 entries in Bouquet userbouquet.dbe11.tv
loading bouquet... /etc/enigma2/userbouquet.dbe24.tv 2280
152 entries in Bouquet userbouquet.dbe24.tv
loading bouquet... /etc/enigma2/userbouquet.dbe12.tv 2432
10 entries in Bouquet userbouquet.dbe12.tv
loading bouquet... /etc/enigma2/userbouquet.dbe35.tv 2442
17 entries in Bouquet userbouquet.dbe35.tv
loading bouquet... /etc/enigma2/userbouquet.dbe13.tv 2459
175 entries in Bouquet userbouquet.dbe13.tv
loading bouquet... /etc/enigma2/userbouquet.dbe14.tv 2634
247 entries in Bouquet userbouquet.dbe14.tv
loading bouquet... /etc/enigma2/userbouquet.dbe16.tv 2881
135 entries in Bouquet userbouquet.dbe16.tv
loading bouquet... /etc/enigma2/userbouquet.dbe17.tv 3016
25 entries in Bouquet userbouquet.dbe17.tv
loading bouquet... /etc/enigma2/userbouquet.dbe19.tv 3041
198 entries in Bouquet userbouquet.dbe19.tv
loading bouquet... /etc/enigma2/userbouquet.dbe21.tv 3239
53 entries in Bouquet userbouquet.dbe21.tv
loading bouquet... /etc/enigma2/userbouquet.dbe22.tv 3292
34 entries in Bouquet userbouquet.dbe22.tv
loading bouquet... /etc/enigma2/userbouquet.dbe23.tv 3326
50 entries in Bouquet userbouquet.dbe23.tv
loading bouquet... /etc/enigma2/userbouquet.dbe25.tv 3376
22 entries in Bouquet userbouquet.dbe25.tv
loading bouquet... /etc/enigma2/userbouquet.dbe33.tv 3398
127 entries in Bouquet userbouquet.dbe33.tv
loading bouquet... /etc/enigma2/userbouquet.dbe34.tv 3525
60 entries in Bouquet userbouquet.dbe34.tv
29 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.nc_25062014_1341.radio 1
102 entries in Bouquet userbouquet.nc_25062014_1341.radio
loading bouquet... /etc/enigma2/userbouquet.nc_30042014_1337.radio 103
102 entries in Bouquet userbouquet.nc_30042014_1337.radio
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 205
5 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe01.radio 210
9 entries in Bouquet userbouquet.dbe01.radio
loading bouquet... /etc/enigma2/userbouquet.others_radio.radio 219
1 entries in Bouquet userbouquet.others_radio.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 220
0 entries in Bouquet userbouquet.favourites.radio
6 entries in Bouquet bouquets.radio
sys:1: DeprecationWarning: Support for pyOpenSSL 0.9 is deprecated.  Upgrade to pyOpenSSL 0.10 or newer.
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[font] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[font] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[font] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[font] adding font /usr/local/share/fonts/redigit.ttf...OK (LCD)
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[font] adding font /usr/local/share/fonts/bahamas.ttf...OK (Bahamas)
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Console)
[font] adding font /usr/local/share/fonts/cool.ttf...OK (Arial)
[font] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/local/share/keymaps/default.kmap
Activating language Polski
[ePopen] command: ip -o addr show dev eth0
[FP] set language to  pl
[FP] set language to  pl
[EPGRefresh] Unable to initialize MPHelp: No module named MPHelp - Help not available!
DMnapi: utf-8-sig
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
setMode > Switch video : component1080i
setMode - port: HDMI mode: 1080i rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
updateColor:  HDMI
[eSocketMMIHandler] created successfully
[FP] set language to  pl
[FP] set language to  pl
[FP] fallback to default translation for Big Picon - 220x132
[FP] fallback to default translation for 0
[FP] fallback to default translation for 1
[FP] fallback to default translation for 2
[FP] fallback to default translation for 3
[FP] fallback to default translation for 13
[FP] fallback to default translation for 14
[FP] fallback to default translation for 16
[FP] fallback to default translation for 19
[FP] fallback to default translation for Big Picon
[FP] fallback to default translation for Ubuntu
[FP] fallback to default translation for Aller
[FP] fallback to default translation for Roboto
[FP] fallback to default translation for Cool
[FP] fallback to default translation for 80%
[FP] fallback to default translation for 85%
[FP] fallback to default translation for 90%
[FP] fallback to default translation for 95%
[FP] fallback to default translation for 100%
[FP] fallback to default translation for 105%
[FP] fallback to default translation for 110%
[FP] fallback to default translation for 115%
[FP] fallback to default translation for 120%
[FP] fallback to default translation for 80%
[FP] fallback to default translation for 85%
[FP] fallback to default translation for 90%
[FP] fallback to default translation for 95%
[FP] fallback to default translation for 100%
[FP] fallback to default translation for 105%
[FP] fallback to default translation for 110%
[FP] fallback to default translation for 115%
[FP] fallback to default translation for 120%
[FP] fallback to default translation for 80%
[FP] fallback to default translation for 85%
[FP] fallback to default translation for 90%
[FP] fallback to default translation for 95%
[FP] fallback to default translation for 100%
[FP] fallback to default translation for 105%
[FP] fallback to default translation for 110%
[FP] fallback to default translation for 115%
[FP] fallback to default translation for 120%
[FP] fallback to default translation for 80%
[FP] fallback to default translation for 85%
[FP] fallback to default translation for 90%
[FP] fallback to default translation for 95%
[FP] fallback to default translation for 100%
[FP] fallback to default translation for 105%
[FP] fallback to default translation for 110%
[FP] fallback to default translation for 115%
[FP] fallback to default translation for 120%
[FP] fallback to default translation for 80%
[FP] fallback to default translation for 85%
[FP] fallback to default translation for 90%
[FP] fallback to default translation for 95%
[FP] fallback to default translation for 100%
[FP] fallback to default translation for 105%
[FP] fallback to default translation for 110%
[FP] fallback to default translation for 115%
[FP] fallback to default translation for 120%
[FP] fallback to default translation for Yes
[FP] fallback to default translation for No
[font] adding font /usr/lib/enigma2/python/Plugins/SystemPlugins/FrontPanel/fonts/erbos.ttf...OK (Erbos)
[FP] set language to  pl
[FP] set language to  pl
[FP] fallback to default translation for Automatic Volume Adjustment
starting hotplug handler
[AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
[AutomaticVolumeAdjustmentConfig] Loading config file...
[AutomaticVolumeAdjustmentConfig] Loaded 1 entries from config file...
[AutomaticVolumeAdjustment] initialize config values...
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[ePNG] couldn't open /usr/local/share/enigma2/ico_dvb_s-fs8.png
[ePNG] couldn't open /usr/local/share/enigma2/ico_dvb_c-fs8.png
[ePNG] couldn't open /usr/local/share/enigma2/ico_dvb_t-fs8.png
[ePNG] couldn't open /usr/local/share/enigma2/ico_service_group-fs8.png
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
[Picon] adding path: /usr/share/enigma2/picon/
halign must be either left, center, right or block!
[sKIN] No skin to read...
RemovePopup, id = ZapError
setValue 20
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
playing 1:0:1:332E:3390:71:820000:0:0:0:
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 3390:0071
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11158000 Pol 1 SR 27500000 INV 0 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1408 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:332E:3390:71:820000:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 28(17)
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
child has terminated
pipes closed
nameservers: [[192, 168, 2, 1], [217, 237, 150, 188], [193, 193, 158, 10]]
read configured interface: {'lo': {'dhcp': False}, 'ra0': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'mac': '00:03:99:44:55:03', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
set sequence pos 3
set sequence pos 4
[sEC] setVoltage 1
[sEC] sleep 200ms
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11158000 Pol 1 SR 27500000 INV 0 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1408 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
RemovePopup, id = ZapError
AddPopup, id = ZapError
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_OK: 0160
action ->  MsgBoxActions ok
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11158000 Pol 1 SR 27500000 INV 0 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1408 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
RemovePopup, id = ZapError
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
KEY_OK: 0160
[sEC] sendDiseqc: e01038f0(?)
action ->  AssignbuttonActions okc
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_HOME: 0066
action ->  OkCancelActions cancel
KEY_OK: 0160
action ->  AssignbuttonActions okc
KEY_RIGHT: 006A
KEY_RIGHT: 006A
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11158000 Pol 1 SR 27500000 INV 0 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1408 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
RemovePopup, id = ZapError
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_OK: 0160
action ->  OkCancelActions ok
playing 1:0:1:10DB:3E8:13E:820000:0:0:0:
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x17527d0
[eEPGCache] remove channel 0x17527d0
allocate channel.. 03e8:013e
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11393000 Pol 1 SR 27500000 INV 0 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1643 mhz
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:10DB:3E8:13E:820000:0:0:0:
allocate demux
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_BLUE: 0191
action ->  AssignbuttonActions bluec
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11393000 Pol 1 SR 27500000 INV 0 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1643 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
RemovePopup, id = ZapError
AddPopup, id = ZapError
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_DOWN: 006C
action ->  WizardActions down
action ->  DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
KEY_OK: 0160
action ->  WizardActions ok
[sKIN] Parsing embedded skin <embedded-in-'Fantastic'>
warning, skin is missing element key_yellow in <class 'Plugins.Extensions.E2Manager.plugin.Fantastic'>
warning, skin is missing element key_blue in <class 'Plugins.Extensions.E2Manager.plugin.Fantastic'>
warning, skin is missing element key_green in <class 'Plugins.Extensions.E2Manager.plugin.Fantastic'>
warning, skin is missing element key_red in <class 'Plugins.Extensions.E2Manager.plugin.Fantastic'>
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11393000 Pol 1 SR 27500000 INV 0 FEC 4 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1643 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
RemovePopup, id = ZapError
(found in current notifications)
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms

 

link do pliku log

Share this post


Link to post
Share on other sites

Prawdopodobnie masz wyłaczona glowice, Ustawienia>szukanie kanałów>konfiguracja tunera>tu powinno byc Tuner A, Tuner B.Wgraj na nowo liste kanałow z ASTRA HOTBIRD

Share this post


Link to post
Share on other sites
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
opening frontend 2
failed! (/dev/dvb/adapter0/frontend2) No such device
boxtype detection BOX_SH4

found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 6

Share this post


Link to post
Share on other sites

Prawdopodobnie masz wyłaczona glowice, Ustawienia>szukanie kanałów>konfiguracja tunera>tu powinno byc Tuner A, Tuner B.Wgraj na nowo liste kanałow z ASTRA HOTBIRD

 

W ustawieniach jest tylko "Tuner A" lub "Auto" - próbowałem na obu ustawieniach brak reakcji.

 

Lista aktualna.

 

scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
opening frontend 2
failed! (/dev/dvb/adapter0/frontend2) No such device
boxtype detection BOX_SH4

found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 6

 

Nie rozumiem?

 

Gdzie się edytuję zmienną Boxtype?

 

...

init frontpanel

boxtype BXZB

link frontend dvbt

...

Edited by rybak02

Share this post


Link to post
Share on other sites

Czy źle odczytana zmienna boxtype może powodować nie wykrycie tunera?

 

Kondensatory są wymienione, odlutowane sprawdzałem i też były ok.

 

Co mogę sprawdzić na płycie?

 

E2 odpala się normalnie, dysk pracuje prawidłowo.

 

Żadnych anomalii nie widać.

Share this post


Link to post
Share on other sites

Zasilacz sprawdzany na drugim dekoderze działa prawidłowo.

Dekoder na innym zasilaczu zachowuje się tak samo.

 

Może ktoś podać punkty pomiarowe oraz prawidłowe napięcia?

Edited by rybak02

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.