Jump to content
Lucek™

FAQ Azbox

Recommended Posts

Collegare l'hard disk su azbox hd premium 
Una foto che spiega quale connettore usare per connettere l'hard disk.Anche perchè se si sbaglia rischiate di sfondare il decoder.Un saluto





Be carefull when connecting a HDD into a Azbox Premium HD.

The SATA connector and the power supply are not close to each other.

Please take a look at the attached file for details.

Pr2

Hello,

Please read carefully this post BEFORE installing your SATA HDD into a Azbox Premium HD.


- Connect the SATA Cable on the black SATA connector with keyway.
- Connect the Power supply to the white socket with keyway on top of the SSD cartridge.


Connecting the Power supply on the black socket without keyway close to the SATA connector with DAMAGE your Azbox Premium HD. (bad odor, no more SSD, no more power on the USB and on the TUNER so be carefull).

 

 

15fi3hz.jpg

Share this post


Link to post
Share on other sites

  • DVB-S / DVB-S2 / DVB-T / DVB-C compatibile con
  • MPEG-2 / MPEG-4 AVC / H.264
  • 1x DVB-S2-Tuner (Single-Tuner) / optional un 2. Tuner
  • 1x Samsung UHF-Tuner (Single-Tuner)
  • 1x HDMI (1.2)
  • 1x SCART (RGB, YUV, CVBS)
  • 1x Komponenten-Video (YPbPr)
  • 1x S/PDIF Dolby Digital
  • 1x RCA-Video
  • 1x RCA-Audio
  • 2x Sat-Antenne (in/out) / 2x Koaxial DVB-T (in/out)
  • 2x USB 2.0 (Typ A hinten)
  • 1x Ethernet / LAN 10/100 MBit
  • 1x 0/12V Switch
  • 2x CI-Slot für Pay-TV
  • 1x Smartcard-Reader
  • Netzschalter für die vollständige Abschaltung des Receivers
  • Speicherplätze für TV- und Radio-Programme
  • Web interface for remote control of the receiver’s
  • Update on the Internet, USB and serial port for update
  • Personal Video Recorder: timeshift (pause and play live TV, time-recording of programs), Receiver streaming (audio / video and radio), Video On Demand
  • NG RACE GoGo List (Online Station List Update)
  • Audio & Music portals, YouTube and other video portals
  • RSS feeds, Web browser, Webradio, E-Mail client (POP3 Only)
  • Alphanumerische VFD-Anzeige mit ca. 8 Zeichen und Zusatzsymbolen
  • Variables Bildformat 4:3, 4:3 mit Letterbox Funktion, Pan & Scan oder 16:9
  • 1080p, 1080i, 720p, 576p und 576i (HDMI und SCART) - PAL oder NTSC
  • DiSEqC 1.0, 1.2, 1.3 USALS
  • Picture-in-Graphics (PIG) beim Multi Language OSD/Menu
  • Timeshift für zeitversetztes Fernsehen
  • Elektronischer Programmführer (EPG) für eine Programmvorschau von bis zu 7 Tagen
  • Fast-Videotextgenerator
  • Aufnahmetimer für Ereignisse, komfortabel über EPG zu programmieren
  • Eine Hauptprogrammliste und Favoritenlisten, individuell bearbeitbar
  • SIGMA Prozessor SMP 8634 LF MIPS-CPU 300 MHz
  • 256 MB DDR-RAM, 16 MB Flash Memory, EEPROM 256 KB
  • Maße: 300 x 218 x 66mm (B x T x H)
  • System: Linux Kernel 2.6.15 (Sigma-Arch), Celrun TV als grafische Oberfläche

 

 

101_0427-500x281.jpg

 

28012009063-500x375.jpg

 

28012009066-500x375.jpg

 

28012009067-500x375.jpg

 

101_0447-500x281.jpg

 

101_0441-500x281.jpg

 

101_0442-500x281.jpg

 

101_0458-500x281.jpg

 

101_0461-500x281.jpg

 

101_0421-500x281.jpg

 

101_0438-500x281.jpg

 

101_0444-500x281.jpg

 

 

 

101_0445-500x281.jpg

 

101_0448-500x281.jpg

 

101_0451-500x281.jpg

 

101_0452-500x281.jpg

 

101_0453-500x281.jpg

 

101_0454-500x281.jpg

 

101_0464-500x281.jpg

 

101_0465-500x281.jpg

 

101_0467-500x281.jpg

 

101_0471-500x281.jpg

 

101_0475-500x281.jpg

 

101_0487-500x281.jpg

 

101_0488-500x281.jpg

 

101_0491-500x281.jpg

Share this post


Link to post
Share on other sites

Instalacja dostępnych pluginów z poziomu tunera przez internet

 

 

Skopiowano z zagranicznego forum

 

W skrócie po polsku.

Chcąc zainstalować jakiś plugin(Plug-ins->czerwon przycisk pilota) lub emu(Plug-ins -> OpenXCAS...) dajemy "manual install" i wpisujemy odpowiedni adres:

 

Pluginy:

 

 

 

Kod:

http://www.islaremota.com/azpEmu i dodatki do OpenXCAS:

 

 

Kod:

http://www.islaremota.com/aza

 

 

================================================== =======

Here is the "How to" by me...

 

There are two places where one can add/edit the links from which one can download and install stuff for AZbox HD:

 

1) Press the HOME button on your remote and go to -> Plug-ins -> RED BUTTON ON YOUR REMOTE [= "add plug-in"] -> edit the links by pressing the blue button on your remote.

 

2) Press the HOME button on your remote and go to Plug-ins -> OpenXCAS -> Manual install -> edit the links.

 

One can edit them by pressing the blue button. Leave one of the links in each of the two parts as azboxworld.com - the "semi-official" one, as it were....

 

A note: one gets the sign " / " by pressing the CAPS/NUM on your remote a couple of times, then 1 = / etc. etc. Also, use that button to change between the caps, numbers etc.

 

Now, you're gonna get a whole new world of support for AZbox HD, which will, no doubt, grow and grow...

 

==========================================

 

An example:

 

If you install, for instance, SCDXCas, you get an automatic updating of keys for MGcamd: all one needs to do is to find it on the list [sCDXCas.tgz] -> press OK to install......

 

When it's done activate [only!] your MGcamd and SCDXCas [they must not have # in front of them, which is changed by pressing the blue button on your remote], then reboot, just in case...

 

Now, try going to, say, DigiTV [Film 1 or 2 on 1'W, Thor/Intelsat satellite position], which package of channels is encrypted in Nagra2 CAS, which CAS is hacked - and wait a bit to see the colooooouuuursssssssss...

 

==========================================

 

Thanx to the good guys at AZboxHD.es!!!!

 

Code:

 

http://azboxhd.es/foro/foro.php

 

 

 

Plugins:

Code:

 

http://www.islaremota.com/azp

 

- I added this one under HOME -> Plug-ins -> RED BUTTON ON YOUR REMOTE -> edit one of them, using the blue button, with this info...

 

Addons:

Code:

 

http://www.islaremota.com/aza

 

- I added this one, plus all the rest of them links below, under HOME -> Plug-ins -> OpenXCAS -> Manual Install -> edit a link...

 

Here is what they offer, as of today, 18th June 2009, more to follow, no doubt [thanx to terrorman!!]!!!

 

Plugins:

* OpenXCAS

* OpenXCAS2

* OneStep_EMU

* MultiCAS

* IncubusCamD

* gCam

* LiveScores

* SudoQ

* TuxChess

* WeatherForecast

 

Addons:

* MultiCAS_v157D-4T11-2_2k90613.tar.gz

* MultiCAS_v157D-4T10.tgz

* MultiCAS_v157D-4T7_2k90514.tgz

* MultiCAS_v157C_2k90325.tgz

* NewCS_Full.tgz

* CCcam_v0.3b_FULL.tgz

* CCcam_v0.3b_UPD.tgz

* CCcam_v0.1b_FULL.tgz

* CCcam_v0.1b_UPD.tgz

* IncubusCamd_v0.55.tgz

* Mbox_v0.5b_build.v0024_FULL.tgz

* Mbox_v0.5b_build.v0024_UPD.tgz

* Mbox_v0.4b_build.v0023_FULL.tgz

* Mbox_v0.4b_build.v0023_UPD.tgz

* NewCS_IncubusCamd.tgz

* NewCS_IncubusCamd_Mbox.tgz

* NewCS_Mbox.tgz

* MGCamD_Full.tgz

 

======================================

 

Code:

 

www.satelites.info/azbox/

 

- thanx to BE-COOL!!!

 

Code:

 

www.azboxhd.no-ip.org

 

- thanx to DJBlu!!!

 

Code:

 

www.azboxworld.com

 

- the semi-official server!!!

 

RISPEKT, ONCE AGAIN, TO ALL INVOLVED!!!!

 

Cheers!!!

 

żródło, z forum lakiego scalpel

Share this post


Link to post
Share on other sites

The alternative AZbox HD detailed guide!

A .pdf file!!! You need an Acrobat Reader, for instance, to read it.... It's free!

 

You now have the Bookmarks tab added to the file: click on the second icon from the top, on the left vertical side of the screen! It takes you quickly to where you wanna go!

 

Thanx to my good lady for teaching me a bit about editing!!!

 

Comments welcome! Please, teach me!

 

Criticism is cool, too!!!!!!!!!!

 

Sharing is caring!

 

 

THX TO: gorski @azbox.to Board

 

:download:

 

The alternative AZbox HD guide by gorski_6.9.09

Share this post


Link to post
Share on other sites

Zaczynamy zabawę z Azboxem

 

Ponieważ też sam zaczynałem ustawienia wszystkiego od początku kiedy dostałem nowy tuner, starałem się czytać wszędzie gdzie coś było napisane.

 

Postaram się sukcesywnie dodawać krok po kroku co należy zrobić żeby być w pełni szczęśliwym posiadaczem AZBOXa

 

Pierwsze musimy zmienić soft na jakiś przyjażniejszy wgrywamy go np na pendriva

Ważne:

 

plik musi sie nazywać patch.bin

wyłączamy tuner z tyłu wkładamy pendriva i włączamy tuner czekamy aż sie nam pojawi plansza, wybieramy USB dajemy OK czekamy.

 

Ważne:

 

Pod żadnym pozorem nie wolno wyłączać tunera aż skończy (grozi to uszkodzeniem tunera)

 

Teraz kiedy już mamy nowy soft możemy przejść do ustawień sieci.

 

img_0228d661.jpg

 

 

Ja ustawiłem statyczne IP

 

Jeżeli wszystko ustawiliśmy dobrze to możemy potestować czy mamy połączenie z netem.

 

img_0229794b.jpg

 

Teraz przechodzimy do wgrywania Pluginów

 

img_02301227.jpg

 

 

INSTALACJA DOSTEPNYCH PLUGINOW Z POZIOMU TUNERA wg opisu @darekmarat1975

 

Logujemy sie do Total Comander, w katalogu /EMU tworzymy plik o nazwie "plugins.conf"

otwieramy go edytorem tekstu , wklejamy i zapisujemy w nim poniższy tekst:

 

[sERVER]

PLUGINS_SERVER_1=http://www.descargas.azboxhd.es

PLUGINS_SERVER_2=http://www.islaremota.com/azp

PLUGINS_SERVER_3=http://www.satelites.info/azbox/

PLUGINS_SERVER_4=http://www.azupd.com

# Only 4 servers possible

# PLUGINS_SERVER_x=http://azboxhd.no-ip.org

# PLUGINS_SERVER_x=http://azboxworld.comIn the /EMU/OpenXCAS

 

W katalogu /EMU/OpenXCAS/ tworzymy plik o addons.conf , do niego wklejamy poniższy tekst:

 

[sERVER]

[sERVER]

CAMD_SERVER_1=http://www.islaremota.com/aza

CAMD_SERVER_2=http://www.satelites.info/azbox/

CAMD_SERVER_3=http://www.descargas.azboxhd.es

CAMD_SERVER_4=http://azboxworld.com

AUTO_MY_SERVER=http://azboxworld.com

# Only 4 Add-ons server possible

# CAMD_SERVER_x=http://azboxhd.no-ip.org

 

Teraz po edycji tych plikow mamy najnowsze serwery z pluginami

 

img_0232be58.jpg

 

 

Pierwsze co musimy wgrac to OpenXCAS czyli,

 

Plug-ins > add plug-ins > pojawi się lista serwerów > wybierasz azboxworld.com (OK) > instalujesz OpenxCAS (OK) > restart tunera.

 

Następnie musimy wgrać Camd czyli,

 

Plug-ins > OpenXCAS > download executable > np: azboxworld.com (OK) > Z listy wybierasz i instalujesz camd > restart.

 

img_0231e925.jpg

 

 

Możemy już podglądnąć i ustawić jako aktywne te które chcemy.

 

img_0233cad4.jpg

 

 

Ja używam karty więc mgcamd ustawiłem tylko do testów.

img_0234aaad.jpg

Edited by prac

Share this post


Link to post
Share on other sites

Opiszę jak ustawić MultiCas

 

Sam do testów szukałem opisu jak to ustawić, znalazłem opis ale trochę mało zrozumiały dla mniej biegłych w temacie.

 

Zabawę zaczynamy od ściągnięcia ze strony azboxa wg opisu z poprzedniego posta MultCAS najlepiej najnowszego, teraz wchodzimy do menu

"03 Plugnis" => OK

 

09660eca84adcf4bmed.jpg

 

OpenXCAS => OK

 

e2439627204dd3f0med.jpg

 

Wciskamy => OK

 

53d77f8dceec11b7med.jpg

 

Wciskamy => OK

 

W Mode zmieniamy < > na np. Client CCCam

 

4c2a3757db16cb74med.jpg

 

Wciskamy Niebieski przycisk jeżeli mamy wpis w cccam.cfg to powinno nam wczytać linijki.

 

Zapisujemy Czerwonym przyciskiem

wychodzimy exitem, tutaj mamy pytanie wiec potwierdzamy Tak.

 

To już wszystko teraz wystarczy tylko aktywować MultiCas Żółtym przyciskiem

 

0bcf5f00d8610b3bmed.jpg

 

Jeżeli zajdzie konieczność to możemy zrobić pełnego reseta tunera.

Share this post


Link to post
Share on other sites

AzBox HD / Enigma2 Orilinal on Kernel 3.3.1 Software (Official Fw) Establish

 

Install the software on the Orilinal Kernel 3.3.1

 

If you are a kernelli E2 Azbox HD cihazınınızda 3.3.1 software installed, the original software that is installed on the USB memory önnceden If you are having problems opening. Or a new build, the installation of the original software installation screen baºlatamayıp experiencing blue solution is as follows.* Firstly you need to go on an expedition to a program kernelli 02/06/22. This phase of the return is quite risky and requires attention.*

 

1 -) Must return required to be at the beginning of this process must be strictly AZUp'ın version 2.2.7.* Another provision of the initial installation kernelli 02/06/22 (video wizard) until you reach the screen, never close your machine. If you are a problem in the installation splash screen will not come. In this case, turn off the device with the same IP number, please re-install.

 

35852588.jpg

 

2 -) The installation was done in a normal way, now with the old 2.1.6 version AZUp old kernel 6.2.22 kernelli to install only the software will be sufficient. AZUp 2.1.6, kernel 2.6.22.

 

48708596.jpg

 

3 -) with the fat32 formatted USB memory device after the installation of the original FW4USB AZUp 2.1.6 still need to install the software.

 

29376101.jpg

 

USB in the original software, DOM, or Enigma2 software will function normally.* 4 -) Then AZUp kernelli software 2.2.7 3.3.1 kursanızda USB stick with the original software still work.

 

77686678.jpg

 

3.3.1 kernelli software you need to install it again later stages, re-install the kernel.

 

19930256.jpg

 

 

Take it easy.* Yours.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.