Jump to content
Na forum sat-4-all.com obowiązuje bezwzględny zakaz oferowania sharingu oraz umieszczania linków do treści łamiących prawa autorskie.

EMU azbox hd

Recommended Posts

CCcam for azbox hd


first release

And that Day has come. We are presenting You first release of CCcam for AzBox. This is beta version, please post up Feed back's on all forums and communities.

Release notes:

First beta version.

Support for One se*ver, just for user to see that CCcam works !!!

Known bug's with I*deto and *** !!!

Next day's new versions will come public !!!

NOTE: Do not forgett to put CHMOD 755 to files !!!




Share this post

Link to post
Share on other sites


CCCam release 0.2 AZbox HD


Again something new from MOWER-Kitchen

Added Recording - recording now working through CCCam






Share this post

Link to post
Share on other sites

CCcam 2.1.1 na AzBox HD



First of all, I would like all users to read Thread started by the The_Ripper for which all Thanks goes for this great work.


The_Ripper Thread




I will try just to explain on one place how to install and run native CCcam 2.1.1 ( CCcam.mips ) on AzBox HD Elite and Premium.



First of all, download from this thread file, called azbox-cccam-2-1-1-working.rar . Unpack it on Your desktop.


Use FileZilla FTP or any FTP manager to connect on You AzBox HD device.


Enter in /EMU folder and create directory lib , so You will have /EMU/lib .


Now transfer this files to that directory from just downloaded archive from this thread :


CCcam.mipsel , ld.so.1, libc.so.6, libcrypt.so.1, libdl.so.2, libdvbapi.so, libgcc_s.so.2, libm.so.6, libnss_dns.so.2, libnss_files.so.2, libnss_hesiod.so.2, libnss_nis.so.2, libnss_nisplus.so.2, libpthread.so.1, libresolv.so.2, libstdc++.so.7 . ( It means, copy all files except file dvbapi_module from my archive ).


Please put CHMOD 755 on all files which You copied to /EMU/lib directory !!! This is very important !!!


Prepare Your CCcam.cfg file and copy it, inside of /EMU/lib directory.

Now, You have to go inside of /EMU/OpenXCAS directory and there You should create new directory called dvbapiCAS, so You will have /EMU/OpenXCAS/dvbapiCAS . Put inside of that folder file called dvbapi_module and give CHMOD 755 to that file.


Also it is important that You create inside of that /EMU/OpenXCAS/dvbapiCAS file named as openxcas.conf which should contain this :




name = dvbapiCAS

daemon = dvbapi_module

version = 1.00

Now when all is settled You can start it.


But keep in mind, first start CCcam and then start dvbapi_module.


Also keep in mind that all other EMU's are dissabled in OpenXCAS panel Camd activation and priority settings.


To start CCcam use this command :



LD_PRELOAD=/EMU/lib/libdvbapi.so /EMU/lib/ld.so.1 --library-path /EMU/lib/ /EMU/lib/CCcam.mipsel -dv -C /EMU/lib/CCcam.cfg &

And to start dvbapi_module:


Go inside of /EMU/OpenXCAS/dvbapiCAS


and type this command:




The best combination is to start 2 telnet sessions to Your AzBox HD, on first session run CCcam on seccond start dvbapi_module.





Thanks to The_Ripper .


Automatic Running ( no need to start manually ) :


If You want to run CCcam 2.1.1 from OpenXCAS Panel , Camd Activation and Priority .


First You have to copy 2 files , dvbapi.sh and openxcas.conf to /EMU/OpenXCAS/dvbapiCAS .


Also extract arhive module.rar and copy module.seq file to /EMU/OpenXCAS .


Files are attached to this post


Then, go in OpenXCAS Panel on Your AzBox HD, and choose Camd activation and priority and You can start and restart CCcam 2.1.1 from there as dvbapiCAS.




Edited by DEFFCON

Share this post

Link to post
Share on other sites

CCcam v2.1.1 Auto-Install v1.3






1. FTP: Send file to /cccam

2. TELNET: chmod 755 /cccam

3. TELNET: /cccam


4. Edit /EMU/lib/CCcam.cfg

4.1 Add CLine and write file

5. Reboot AZBox HD













Edited by LucekSAT™

Share this post

Link to post
Share on other sites

CCCam 2.0.4 AZbox HD


Neue CCCam für Azbox keine Portierung



* Ohne Fehler beim ECM Cache

* Komplett mit allen Bibliotheken zu kopieren und dann die Rechte vergeben (chmod 755)



Ein spezieller Dank geht an ASH für die Aktualisierung



lib.zip (2,08 MB)

Share this post

Link to post
Share on other sites

AzBox HD CCcam Monitoring Software


zbox HD Emulators/Cams Emulators & Cams for AzBox HD


1) download software


2) unzip the file


3) click on the .exe file and program startup



4) Click on Box settings and then the submenu AzboxHD login here insert the ip off your AZbox + user/password ( default : root azbox )


5) click on online cards and click refresh


6) your access able cards are shown


this will let you see what cards you have and can configure your lines




Share this post

Link to post
Share on other sites

MGcamd - GBox Client for AzboxHD


MGcamd - gbox Client for AzboxHD




Low and decompresses files added here

- MGcamd
- Inicio Mgcamd

Copy the folder mgcamd as is / EMU / OpenXCAS / and give it attributes 755

Check that the attributes of the files within the folders are like this:

/ EMU / OpenXCAS / mgcamd /
mg_cfg 644
mgcamd 755
newcamd.list 644 If you do not use the otherwise Newcs 755
nfs.sh 644
openxcas.conf 755
peer_cfg 644
priority.list 644

For the beginning of the Emu receiver automatically when you turn on power and also activate it manually from Plugins with the remote, copy the files from Home Mgcamd in / EMU / OpenXCAS /.

After copying all the files where you enter corresponds / EMU / OpenXCAS / mgcamd /, you will see a number of files ... including those corresponding to the configuration of Mgcamd, here's how to configure:

On one hand we have a "cwshare", called PEER_CFG, which has the same structure as in Gbox. I put the configuration that works for me better than .


I: (02) # you can put 03 but you run the risk that the emu crash besides it takes a lot to open the channels.
X: (10) # Go not with the cards that will look for, problems of fluidity.
N: (00 01 03 3F 3000 8000)

M: (your ip camouflaged (password))

D: (ip of peer camouflaged your port its port ((pass (A5 A5))))

* For testing the lines G: and Y: [/ quote] Another configuration file is MG_CFG you explain how it works ...


1 .- Communication protocol we will use (newcamd, gbox, etc. .....).

# Network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd NetClient
# 02 radegast NetClient
# 03 newcamd / radegast net client
# 04 Camd3 NetClient
# 08 gbox NetClient
# 09 newcamd / GOx net client
G: (08)

And the preferential connection either:

# Network shares priority
# 00 gbox, newcamd, radegast, Camd3 (default)
# 01 Camd3, radegast, newcamd, gbox
# 02 newcamd, Camd3, gbox, radegast
Q: (00)

2 .- That emms reception takes place in general or whether it takes place exclusively when in a closed channel.

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cannot be decoded
# 03 process emm pids for network cards update only
A: (02)

3 .- On the possibility of receiving messages via OSD issued by the newcs server:

# On screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + User password for http auth
O: (02) username password

# On screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + Web port to use for osd
S: (02) 80

We indcado the most significant, but it has some things, such as how to show the loginscreen the operation of the emu, etc. .....
* zonatv.com

And we have another file called PRIORITY.LIST which is also essential for the proper functioning of Mgcamd. In this file to indicate which are the CAID's and suppliers which, preferentially, we want conectar.Una correct configuration of this file will allow us to streamline and accelerate the opening of the channels that we signed


# Use this via prov first
V: (00 78 00)
# Use this seca prov first
S: (80 00)
# Use this caid first
X: (06 02)

As noted in the example we have:

V: (00 78 00) Here we mean that group Viaccess CAID (V), we give preference to the provider 007,800.
S: (80 00) Here, the group that drop Seca (S), we like the vendor 8000.
X: (06 02) And here, we like the 0602 CAID is Irdeto.

We will wonder why there is no section nagra, for example. The answer is that like or Videoguard Irdeto, for example, CAID's are different, we are Nagra eg 1801,1802,1810,1833, etc ..., or Irdeto: 0626, 0628.0631, unlike Dry it in 0100 or where they are all viaccess, hence the need for Section X (only CAID).
* zonatv.com

So with the same X: We may use Nagra, Videoguard, Irdeto etc ...

And we have the newcamd.list we use it to carry out our connection to the server using newcamd protocol exclusively.


# CWS = 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 LAN Server

The most important part of this configuration file is correct CWS line configuration, and we have:

"We must show the ip of our receiver (count dyndns or no-ip, if you want to connect while outside the LAN

Communications-port newcamd to connect through this protocol to our subscriber card, that is, to our newcs (20000).

-Username and password (dummy dummy) allocated in newcs user and need to connect to the newcamd protocol.

Deskey-established as a safety measure for our meeting started newcamd protocol (01 02 03 04 05 06 07 08 09 10 11 12 13 14)

-Lan, if we connect through local area network (LAN) to our subscriber card (to newcs), or wan, if we connect from outside the local network.

-SERVER or the name that we have established to our server newcamd protocol. Remember that this parameter is set to Newcs.xml newcamd section and usually the default is newcs.
* zonatv.com

And with that we would have set the whole system .. unless we turn on newcamd not touch anything.

In my case, so only use Mgcamd cwshare to peer_cfg copying, you must work, because after you adjust the values of all the settings to go for the finest possible. For zapping at the opening of channels there is a delay of 1.5 to 2 seconds.

We can only start the Mgcamd from the remote control:

a) Click the blue trap door "HOME"
B) Click on Plug-Ins
c) Click on OpenXCAS
d) Click on Activation & Priority Setting

e) once there the view that the MGcamd On, So you do not have a # before, if so activate it by pressing the blue button "I-KEY"
f) press the yellow button "LANG" or the OK button to start the MGcamd

g) to exit the menu, press the Blue Button "HOME" and click on TV


Share this post

Link to post
Share on other sites

MGcamd 1.34c


[mgcamd] $ tuxbox mgcamd v1.34c by mixvt (compiled Oct 27 2009 21:48:2


for AzBox HD


Rumors have cccam but without support, in contrast to CoolStream version

Can someone check yes times





Share this post

Link to post
Share on other sites

OSCam v.0.99.2 AzBOX HD



Per Utilità riporto questa "CAM" per AzBOX, nel caso qualcuno voglia fare dei test con il nostro provider



due to some divergence on the principle of Open Source, we have start a fork of MpCS version 0.9d.

The new fork is named OSCam, for Open Source Cam. Main changes from MpCS 0.9d are:


- add support for reader with 6.00 MHz (Mhz option in config, only on Linux),

- better support for Viaccess EMMs,

- add support for some videoguard2 cards (aka NDS, Sky UK and Sky IT) only on Linux at this time,

- support for SECA PPV (but you still need to buy the event/film),

- and some bugs corrections.


Note: NDS and 6.0 MHz support are only working and tested on Linux i686 and x86_64. It should not work on dreambox (at this time).


Thanks a _lot_ to Dukat for the original MpCS.





Share this post

Link to post
Share on other sites

LSDCS LightSatDreamCardsharingServer 1.6c

(Internal Cardreader, newcs-protokol, Dre, Via, Irdeto)


  • sharing server
  • protokol newcs
  • interne cardreader
  • karten: dre1/2, via1/2, irdeto1/2




lsdcs.rar (74,1 KB)

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.