Jump to content
Na forum sat-4-all.com obowiązuje bezwzględny zakaz oferowania sharingu oraz umieszczania linków do treści łamiących prawa autorskie.
Sign in to follow this  
sumkoski

GS przy przełączaniu kanałów

Recommended Posts

Witam.  Raz dziennie pojawia się gs przy przełączaniu  - nie ma to różnicy jaki to kanał.  Kondensatory wizualnie sprawdzone - spuchnięte wymienione.  Celem sprawdzenia czy nie piszczy żaden kondensator wziąłem stetoskop diagnostyczny i sprawdzałem kondensatory na głowicy. Kondensatory nie piszczały jednak cewka zaznaczona na zdjęciu tak i to dość głośno. Cewka może powodować te GSy?  Dekoder to BSKA z softem od Jacek Toryń.

 

GS

<?xml version="1.0" encoding="utf-8"?>
<openpli>
	<enigma2>
		<crashdate>Sat Feb  1 20:04:58 2020</crashdate>
		<compiledate>Jun 10 2014</compiledate>
		<contactemail>somebody who cares</contactemail>
		<!-- Please email this crashlog to above address -->
		<skin>infinityHD-nbox/skin.xml</skin>
		<sourcedate>2013-03-31</sourcedate>
		<branch>master</branch>
		<rev>cc30cc5</rev>
		<version>3.0.0</version>
	</enigma2>
	<image>
		<stbmodel>nbox</stbmodel>
		<kernelversion>
			<!-- Cannot allocate memory -->
		</kernelversion>
		<kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:00:11:22:33:44:55 init=/bin/devinit</kernelcmdline>
		<nimsockets>NIM Socket 0:</nimsockets>
		<imageversion>
			<![CDATA[
version=0860201406250000
]]>
		</imageversion>
		<imageissue>
			<!-- No such file or directory -->
		</imageissue>
	</image>
	<crashlogs>
		<enigma2crashlog>
			<![CDATA[
 (Invalid argument)
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
action ->  AssignbuttonActions okc
action ->  OkCancelActions ok
playing 1:0:1:C1D:1E78:71:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3ABD:514:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3ABD:514:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1c6eae8
[eEPGCache] remove channel 0x1c6eae8
allocate channel.. 1e78:0071
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12265000 Pol 1 SR 27500000 INV 0 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1665 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:C1D:1E78:71:820000:0:0:0:
allocate demux
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 40ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f1(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1b, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2d1ba0c8 running
[eEPGCache] channel 0x2d1ba0c8 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (012d), and 1 audio stream(s) (0137), and the pcr pid is 012d, and the text pid is 0139
allocate demux
decoder state: play, vpid=301, apid=311
DMX_SET_PES_FILTER(0x12d) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x137) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x12d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x139) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
[eDVBCAService] new service 1:0:1:C1D:1E78:71:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:C1D:1E78:71:820000:0:0:0:
PATready
use pmtpid 0032 for service_id 0c1d
[eDVBLocalTimerHandler] diff is 10
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 17:24:58
[eDVBLocalTimerHandler] m_time_difference is 10
[eDVBLocalTimerHandler] diff is small = not set Linux Time
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
FE_GET_PROPERTY failed (Invalid argument)
eventNewProgramInfo 0 0
have 1 video stream(s) (012d), and 2 audio stream(s) (0137, 0138), and the pcr pid is 012d, and the text pid is 0139
decoder state: play, vpid=301, apid=311
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[EPGC] start caching events(1580574290)
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
FE_GET_PROPERTY failed (Invalid argument)
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1580574297)
[EPGC] schedule other finished(1580574387)
[EPGC] schedule finished(1580574388)
[EPGC] stop caching events(1580574388)
[EPGC] next update in 60 min
action ->  AssignbuttonActions bluec
action ->  ColorActions green
[SKIN] Parsing embedded skin <embedded-in-'Fantastic'>
warning, skin is missing element key_yellow in <class 'Plugins.Extensions.E2Manager.plugin.Fantastic'>
warning, skin is missing element key_blue in <class 'Plugins.Extensions.E2Manager.plugin.Fantastic'>
warning, skin is missing element key_green in <class 'Plugins.Extensions.E2Manager.plugin.Fantastic'>
warning, skin is missing element key_red in <class 'Plugins.Extensions.E2Manager.plugin.Fantastic'>
action ->  WizardActions ok
action ->  WizardActions ok
Console: executing in run 0  the command: /usr/lib/enigma2/python/Plugins/Extensions/E2Manager/info_ecm.sh info_ecm.sh
action ->  WizardActions ok
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
action ->  WizardActions back
action ->  WizardActions back
action ->  InfobarShowHideActions hide
action ->  GlobalActions volumeUp
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
action ->  GlobalActions volumeUp
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
setValue 40
action ->  GlobalActions volumeUp
Setvolume: 45 45 (raw)
Setvolume: 35 35 (-1db)
setValue 45
[eDVBLocalTimerHandler] diff is 9
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available :(
[eDVBLocalTimerHandler] time update to 17:55:00
[eDVBLocalTimerHandler] m_time_difference is 9
[eDVBLocalTimerHandler] diff is small = not set Linux Time
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
action ->  GlobalActions volumeDown
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
setValue 40
action ->  GlobalActions volumeDown
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
action ->  GlobalActions volumeDown
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
action ->  GlobalActions volumeUp
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
[eDVBLocalTimerHandler] diff is 9
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available :(
[eDVBLocalTimerHandler] time update to 18:25:01
[eDVBLocalTimerHandler] m_time_difference is 9
[eDVBLocalTimerHandler] diff is small = not set Linux Time
[EPGC] start caching events(1580577989)
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1580577999)
[EPGC] schedule finished(1580578086)
[EPGC] schedule other finished(1580578086)
[EPGC] stop caching events(1580578086)
[EPGC] next update in 60 min
[eDVBLocalTimerHandler] diff is 9
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available :(
[eDVBLocalTimerHandler] time update to 18:55:02
[eDVBLocalTimerHandler] m_time_difference is 9
[eDVBLocalTimerHandler] diff is small = not set Linux Time
action ->  GlobalActions volumeUp
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
setValue 40
[eDVBLocalTimerHandler] diff is 10
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available :(
[eDVBLocalTimerHandler] time update to 19:25:04
[eDVBLocalTimerHandler] m_time_difference is 10
[eDVBLocalTimerHandler] diff is small = not set Linux Time
[EPGC] start caching events(1580581686)
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1580581693)
[EPGC] schedule other finished(1580581783)
[EPGC] schedule finished(1580581783)
[EPGC] stop caching events(1580581783)
[EPGC] next update in 60 min
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.NumberZap'>
playing 1:0:1:3DD2:640:13E:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:C1D:1E78:71:820000:0:0:0:
[eDVBCAService] free service 1:0:1:C1D:1E78:71:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x2d1ba0c8
[eEPGCache] remove channel 0x2d1ba0c8
allocate channel.. 0640:013e
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11508000 Pol 1 SR 27500000 INV 0 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1758 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3DD2:640:13E:820000:0:0:0:
allocate demux
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f0(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1b, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1b594e8 running
[eEPGCache] channel 0x1b594e8 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0217), and 1 audio stream(s) (0352), and the pcr pid is 0217, and the text pid is ffffffff
allocate demux
[EPGC] next update in 2 sec
decoder state: play, vpid=535, apid=850
DMX_SET_PES_FILTER(0x217) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x352) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x217) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
[eDVBCAService] new service 1:0:1:3DD2:640:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3DD2:640:13E:820000:0:0:0:
[SEC] sleep 500ms
PATready
use pmtpid 0039 for service_id 3dd2
eventNewProgramInfo 0 0
have 1 video stream(s) (0217), and 2 audio stream(s) (0352, 0353), and the pcr pid is 0217, and the text pid is ffffffff
decoder state: play, vpid=535, apid=850
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[eDVBLocalTimerHandler] diff is 11
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:30:19
[eDVBLocalTimerHandler] m_time_difference is 11
[eDVBLocalTimerHandler] diff is small = not set Linux Time
FE_GET_PROPERTY failed (Invalid argument)
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
[EPGC] start caching events(1580581810)
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
FE_GET_PROPERTY failed (Invalid argument)
action ->  GlobalActions volumeDown
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
action ->  GlobalActions volumeDown
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
action ->  InfobarChannelSelection zapUp
playing 1:0:1:3DCD:640:13E:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3DD2:640:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3DD2:640:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3DCD:640:13E:820000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0214), and 1 audio stream(s) (0334), and the pcr pid is 0214, and the text pid is 024f
allocate demux
decoder state: play, vpid=532, apid=820
DMX_SET_PES_FILTER(0x214) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x334) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x214) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x24f) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
[eDVBCAService] new service 1:0:1:3DCD:640:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3DCD:640:13E:820000:0:0:0:
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
PATready
use pmtpid 0034 for service_id 3dcd
eventNewProgramInfo 0 0
have 1 video stream(s) (0214), and 2 audio stream(s) (0334, 0335), and the pcr pid is 0214, and the text pid is 024f
decoder state: play, vpid=532, apid=820
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
AITready
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
FE_GET_PROPERTY failed (Invalid argument)
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1580581817)
FE_GET_PROPERTY failed (Invalid argument)
FE_GET_PROPERTY failed (Invalid argument)
[AutomaticVolumeAdjustment] service changed
[EPGC] schedule finished(1580581907)
[EPGC] stop caching events(1580581907)
[EPGC] next update in 60 min
[eDVBLocalTimerHandler] diff is 10
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available :(
[eDVBLocalTimerHandler] time update to 20:00:19
[eDVBLocalTimerHandler] m_time_difference is 10
[eDVBLocalTimerHandler] diff is small = not set Linux Time
action ->  GlobalActions volumeDown
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
setValue 25
action ->  InfobarChannelSelection zapUp
playing 1:0:1:1139:2AF8:13E:820000:0:0:0::TVP INFO HD
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3DCD:640:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3DCD:640:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1b594e8
[eEPGCache] remove channel 0x1b594e8
allocate channel.. 2af8:013e
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10719000 Pol 1 SR 27500000 INV 0 FEC 9 orbpos 130 system 1 modulation 1 pilot 2, rolloff 0
tuning to 969 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1139:2AF8:13E:820000:0:0:0::TVP INFO HD
allocate demux
main thread is non-idle! display spinner!
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
		</enigma2crashlog>
	</crashlogs>
</openpli>

 

ce.jpg

Share this post


Link to post
Share on other sites

Cewka to raczej mało prawdopodobne by powodowała gs za to skin powoduje gs z braku paru elementów-zmień skina i zobacz czy jest poprawa.

Share this post


Link to post
Share on other sites

<?xml version="1.0" encoding="utf-8"?>
<openpli>
    <enigma2>
        <crashdate>Sun Feb  9 18:51:45 2020</crashdate>
        <compiledate>Jun 10 2014</compiledate>
        <contactemail>somebody who cares</contactemail>
        <!-- Please email this crashlog to above address -->
        <skin>blackGlass-HD/skin.xml</skin>
        <sourcedate>2013-03-31</sourcedate>
        <branch>master</branch>
        <rev>cc30cc5</rev>
        <version>3.0.0</version>
    </enigma2>
    <image>
        <stbmodel>nbox</stbmodel>
        <kernelversion>
            <![CDATA[
Linux nbox 2.6.32.59_stm24_0211 #24 PREEMPT Sat Jun 28 08:43:29 CEST 2014 sh4 GNU/Linux
]]>
        </kernelversion>
        <kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:00:11:22:33:44:55 init=/bin/devinit</kernelcmdline>
        <nimsockets>NIM Socket 0:</nimsockets>
        <imageversion>
            <![CDATA[
version=0860201406250000
]]>
        </imageversion>
        <imageissue>
            <!-- No such file or directory -->
        </imageissue>
    </image>
    <crashlogs>
        <enigma2crashlog>
            <![CDATA[
 ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:1:3DD0:640:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3DD0:640:13E:820000:0:0:0:
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
PATready
use pmtpid 0037 for service_id 3dd0
eventNewProgramInfo 0 0
have 1 video stream(s) (0216), and 2 audio stream(s) (0348, 0349), and the pcr pid is 0216, and the text pid is 0251
decoder state: play, vpid=534, apid=840
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[EPGC] schedule finished(1581265466)
[EPGC] stop caching events(1581265466)
[EPGC] next update in 60 min
action ->  GlobalActions volumeUp
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
[AutomaticVolumeAdjustment] service changed
action ->  GlobalActions volumeUp
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[eDVBLocalTimerHandler] diff is 7
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available 😞
[eDVBLocalTimerHandler] time update to 17:52:54
[eDVBLocalTimerHandler] m_time_difference is 7
[eDVBLocalTimerHandler] diff is small = not set Linux Time
action ->  GlobalActions volumeDown
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
action ->  GlobalActions volumeDown
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
setValue 25
warning, skin is missing element servicename in <class 'Screens.InfoBarGenerics.NumberZap'>
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.NumberZap'>
playing 1:0:1:3ABD:514:13E:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3DD0:640:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3DD0:640:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1956968
[eEPGCache] remove channel 0x1956968
allocate channel.. 0514:013e
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11449000 Pol 0 SR 27500000 INV 0 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1699 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3ABD:514:13E:820000:0:0:0:
allocate demux
set sequence pos 3
[SEC] setVoltage 2
[SEC] sleep 40ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f2(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1b, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1956968 running
[eEPGCache] channel 0x1956968 running
[EPGC] next update in 13 min
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0216), and 1 audio stream(s) (027a), and the pcr pid is 0216, and the text pid is 0342
allocate demux
decoder state: play, vpid=534, apid=634
DMX_SET_PES_FILTER(0x216) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x27a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x216) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x342) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:1:3ABD:514:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3ABD:514:13E:820000:0:0:0:
PATready
use pmtpid 040d for service_id 3abd
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0216), and 3 audio stream(s) (027a, 02de, 04d2), and the pcr pid is 0216, and the text pid is 0342
decoder state: play, vpid=534, apid=634
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
AITready
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
[eDVBLocalTimerHandler] diff is 8
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 18:00:30
[eDVBLocalTimerHandler] m_time_difference is 8
[eDVBLocalTimerHandler] diff is small = not set Linux Time
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
action ->  InfobarChannelSelection zapDown
playing 1:0:1:C22:1E78:71:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3ABD:514:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3ABD:514:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1956968
[eEPGCache] remove channel 0x1956968
allocate channel.. 1e78:0071
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12265000 Pol 1 SR 27500000 INV 0 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1665 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:C22:1E78:71:820000:0:0:0:
allocate demux
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 40ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f1(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1b, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1956968 running
[eEPGCache] channel 0x1956968 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0606), and 1 audio stream(s) (0604), and the pcr pid is 0606, and the text pid is 0607
allocate demux
decoder state: play, vpid=1542, apid=1540
DMX_SET_PES_FILTER(0x606) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x604) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x606) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x607) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:1:C22:1E78:71:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:C22:1E78:71:820000:0:0:0:
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
PATready
use pmtpid 003a for service_id 0c22
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0606), and 3 audio stream(s) (0604, 0605, 0608), and the pcr pid is 0606, and the text pid is 0607
decoder state: play, vpid=1542, apid=1540
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[eDVBLocalTimerHandler] diff is 7
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 18:00:39
[eDVBLocalTimerHandler] m_time_difference is 7
[eDVBLocalTimerHandler] diff is small = not set Linux Time
[EPGC] start caching events(1581267633)
crc32 failed! is 968ffc4b

action ->  GlobalActions volumeUp
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1581267642)
[EPGC] schedule other finished(1581267730)
[EPGC] schedule finished(1581267730)
[EPGC] stop caching events(1581267730)
[EPGC] next update in 60 min
warning, skin is missing element servicename in <class 'Screens.InfoBarGenerics.NumberZap'>
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.NumberZap'>
playing 1:0:1:3ABD:514:13E:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:C22:1E78:71:820000:0:0:0:
[eDVBCAService] free service 1:0:1:C22:1E78:71:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1956968
[eEPGCache] remove channel 0x1956968
allocate channel.. 0514:013e
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11449000 Pol 0 SR 27500000 INV 0 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1699 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3ABD:514:13E:820000:0:0:0:
allocate demux
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 2
[SEC] sleep 40ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f2(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1b, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1956968 running
[eEPGCache] channel 0x1956968 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0216), and 1 audio stream(s) (027a), and the pcr pid is 0216, and the text pid is 0342
allocate demux
decoder state: play, vpid=534, apid=634
DMX_SET_PES_FILTER(0x216) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x27a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x216) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x342) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:1:3ABD:514:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3ABD:514:13E:820000:0:0:0:
[SEC] sleep 500ms
PATready
use pmtpid 040d for service_id 3abd
eventNewProgramInfo 0 0
have 1 video stream(s) (0216), and 3 audio stream(s) (027a, 02de, 04d2), and the pcr pid is 0216, and the text pid is 0342
decoder state: play, vpid=534, apid=634
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
AITready
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
[eDVBLocalTimerHandler] diff is 8
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 18:20:22
[eDVBLocalTimerHandler] m_time_difference is 8
[eDVBLocalTimerHandler] diff is small = not set Linux Time
[EPGC] start caching events(1581268815)
[AutomaticVolumeAdjustment] service changed
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[AutomaticVolumeAdjustment] service changed
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1581268825)
[EPGC] schedule other finished(1581268912)
[EPGC] schedule finished(1581268913)
[EPGC] stop caching events(1581268913)
[EPGC] next update in 60 min
action ->  GlobalActions volumeUp
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
[eDVBLocalTimerHandler] diff is 8
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available 😞
[eDVBLocalTimerHandler] time update to 18:50:23
[eDVBLocalTimerHandler] m_time_difference is 8
[eDVBLocalTimerHandler] diff is small = not set Linux Time
action ->  GlobalActions power_long
enter standby
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3ABD:514:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3ABD:514:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[FanControl]: setting fan values (standby mode): fanid = 0, voltage = 0, pwm = 110
[DVBCAHandler] no more services
action ->  StandbyActions power
leave standby
playing 1:0:1:3ABD:514:13E:820000:0:0:0:
not pauseable.
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3ABD:514:13E:820000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0216), and 1 audio stream(s) (027a), and the pcr pid is 0216, and the text pid is 0342
allocate demux
decoder state: play, vpid=534, apid=634
DMX_SET_PES_FILTER(0x216) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x27a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x216) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x342) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:1:3ABD:514:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3ABD:514:13E:820000:0:0:0:
[FanControl]: setting fan values: fanid = 0, voltage = 0, pwm = 155
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
        </enigma2crashlog>
    </crashlogs>
</openpli>

W dniu 2.02.2020 o 09:50, marian123 napisał:

Cewka to raczej mało prawdopodobne by powodowała gs za to skin powoduje gs z braku paru elementów-zmień skina i zobacz czy jest poprawa.

 

Share this post


Link to post
Share on other sites
W dniu 2.02.2020 o 09:50, marian123 napisał:

Cewka to raczej mało prawdopodobne by powodowała gs za to skin powoduje gs z braku paru elementów-zmień skina i zobacz czy jest poprawa.

Spoiler

 

 

Share this post


Link to post
Share on other sites

Zainstaluj nowszą wersje OpenPli bo ta 8.3 jest dość stara a do niej instalujesz nowego skina(data) to nie będzie chodziło stare(image) z nowym(skin).

Share this post


Link to post
Share on other sites
21 godzin temu, marian123 napisał:

Zainstaluj nowszą wersje OpenPli bo ta 8.3 jest dość stara a do niej instalujesz nowego skina(data) to nie będzie chodziło stare(image) z nowym(skin).

 

Jest to OpenPli 8.6 a nie jak twierdzisz 8.3.

http://www.jacektorun.pl/Nbox_5800_Enigma2_FB_8.6_openPLI_z_dodatkami.zip

Cewka może powodować  dziwne zachowania dekodera

https://www.elektroda.pl/rtvforum/viewtopic.php?p=17635320#17635320

i chyba czas już na zmianę dekodera 🙂

Share this post


Link to post
Share on other sites
1 godzinę temu, sumkoski napisał:

i chyba czas już na zmianę dekodera 🙂

Powiem Ci, że głównym powodem pozbycia się nboxa przeze mnie były GS'y po przełączeniu na kanał włoski, chyba to było RAI UNO.

To było 5 lata temu. Nie żebym lubił oglądać włoskie kanały, ale brak wsparcia dla nboxa groził, że za jakiś czas na polskich kanałach będą GSy.

Akurat to chyba sie nie sprawdziło, bo człowiek który kupił nboxa do tej pory sobie chwali (wymieniłem wszystkie kondensatory przed sprzedażą, może niepotrzebnie)

Share this post


Link to post
Share on other sites
1 godzinę temu, mandriva napisał:

Powiem Ci, że głównym powodem pozbycia się nboxa przeze mnie były GS'y po przełączeniu na kanał włoski, chyba to było RAI UNO.

To było 5 lata temu. Nie żebym lubił oglądać włoskie kanały, ale brak wsparcia dla nboxa groził, że za jakiś czas na polskich kanałach będą GSy.

Akurat to chyba sie nie sprawdziło, bo człowiek który kupił nboxa do tej pory sobie chwali (wymieniłem wszystkie kondensatory przed sprzedażą, może niepotrzebnie)

nie sprzedam nboxa, już jednego dziewiczego się pozbyłem i do tej pory żałuję , to będzie leżak szafowy  podobnie jak DSX6010  (jak pamiętasz to szacun) co to był za sprzęt 😄 a co do zmiany sprzętu do decyzja już podjęta

Share this post


Link to post
Share on other sites

U mnie przy GS pomogła wymiana elektrolotów w sekcji zasilania. W miejsce C92 wstawiłem kondensator o trochę wyzszej pojemności  i biega tak juz ponad rok bez GS.

Porada wyżej kolegi @Adam o zapchanym nand jest równiez bardzo sensowna. Wcześniej przeniosłem cały IPTV na pena.

 

Share this post


Link to post
Share on other sites
19 godzin temu, bynek65 napisał:

U mnie przy GS pomogła wymiana elektrolotów w sekcji zasilania. W miejsce C92 wstawiłem kondensator o trochę wyzszej pojemności  i biega tak juz ponad rok bez GS.

Porada wyżej kolegi @Adam o zapchanym nand jest równiez bardzo sensowna. Wcześniej przeniosłem cały IPTV na pena.

 

Kiedy miałeś GSy? Pierwsze co zrobiłem to wywaliłem zbędne pluginy np. IPTV, zostały tylko skiny i podstawowe . Dzisiaj kolejny GS

<?xml version="1.0" encoding="utf-8"?>
<openpli>
	<enigma2>
		<crashdate>Wed Feb 12 07:14:39 2020</crashdate>
		<compiledate>Jun 10 2014</compiledate>
		<contactemail>somebody who cares</contactemail>
		<!-- Please email this crashlog to above address -->
		<skin>blackGlass-HD/skin.xml</skin>
		<sourcedate>2013-03-31</sourcedate>
		<branch>master</branch>
		<rev>cc30cc5</rev>
		<version>3.0.0</version>
	</enigma2>
	<image>
		<stbmodel>nbox</stbmodel>
		<kernelversion>
			<![CDATA[
Linux nbox 2.6.32.59_stm24_0211 #24 PREEMPT Sat Jun 28 08:43:29 CEST 2014 sh4 GNU/Linux
]]>
		</kernelversion>
		<kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:00:11:22:33:44:55 init=/bin/devinit</kernelcmdline>
		<nimsockets>NIM Socket 0:</nimsockets>
		<imageversion>
			<![CDATA[
version=0860201406250000
]]>
		</imageversion>
		<imageissue>
			<!-- No such file or directory -->
		</imageissue>
	</image>
	<crashlogs>
		<enigma2crashlog>
			<![CDATA[
em 1 Freq 11508000 Pol 1 SR 27500000 INV 0 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1758 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3DCD:640:13E:820000:0:0:0:
allocate demux
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1b, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1ec2a30 running
[eEPGCache] channel 0x1ec2a30 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0214), and 1 audio stream(s) (0334), and the pcr pid is 0214, and the text pid is 024f
allocate demux
decoder state: play, vpid=532, apid=820
DMX_SET_PES_FILTER(0x214) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x334) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x214) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x24f) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:1:3DCD:640:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3DCD:640:13E:820000:0:0:0:
[SEC] sleep 500ms
[eDVBLocalTimerHandler] diff is 10
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 21:42:07
[eDVBLocalTimerHandler] m_time_difference is 10
[eDVBLocalTimerHandler] diff is small = not set Linux Time
[AutomaticVolumeAdjustment] service changed
PATready
use pmtpid 0034 for service_id 3dcd
eventNewProgramInfo 0 0
have 1 video stream(s) (0214), and 2 audio stream(s) (0334, 0335), and the pcr pid is 0214, and the text pid is 024f
decoder state: play, vpid=532, apid=820
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[AutomaticVolumeAdjustment] service changed
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
AITready
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
[AutomaticVolumeAdjustment] service changed
[EPGC] start caching events(1581453718)
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[AutomaticVolumeAdjustment] service changed
[AutomaticVolumeAdjustment] service changed
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1581453725)
[EPGC] schedule finished(1581453815)
[EPGC] stop caching events(1581453815)
[EPGC] next update in 60 min
action ->  GlobalActions volumeDown
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
setValue 20
action ->  GlobalActions volumeUp
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
setValue 25
[eDVBLocalTimerHandler] diff is 11
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available :(
[eDVBLocalTimerHandler] time update to 22:12:08
[eDVBLocalTimerHandler] m_time_difference is 11
[eDVBLocalTimerHandler] diff is small = not set Linux Time
[eDVBLocalTimerHandler] diff is 11
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available :(
[eDVBLocalTimerHandler] time update to 22:42:08
[eDVBLocalTimerHandler] m_time_difference is 11
[eDVBLocalTimerHandler] diff is small = not set Linux Time
[EPGC] start caching events(1581457415)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1581457423)
[EPGC] schedule finished(1581457512)
[EPGC] stop caching events(1581457512)
[EPGC] next update in 60 min
action ->  GlobalActions volumeDown
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
setValue 20
action ->  GlobalActions power_long
enter standby
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3DCD:640:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3DCD:640:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[FanControl]: setting fan values (standby mode): fanid = 0, voltage = 0, pwm = 110
[DVBCAHandler] no more services
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x1ec2a30
[eEPGCache] remove channel 0x1ec2a30
stop release channel timer
close frontend 0
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
action ->  StandbyActions power
leave standby
playing 1:0:1:3DCD:640:13E:820000:0:0:0:
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0640:013e
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11508000 Pol 1 SR 27500000 INV 0 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1758 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3DCD:640:13E:820000:0:0:0:
allocate demux
[FanControl]: setting fan values: fanid = 0, voltage = 0, pwm = 155
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1b, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x20701b0 running
[eEPGCache] channel 0x20701b0 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0214), and 1 audio stream(s) (0334), and the pcr pid is 0214, and the text pid is 024f
allocate demux
decoder state: play, vpid=532, apid=820
DMX_SET_PES_FILTER(0x214) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x334) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x214) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x24f) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:1:3DCD:640:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3DCD:640:13E:820000:0:0:0:
[SEC] sleep 500ms
[eDVBLocalTimerHandler] diff is 11
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 06:29:21
[eDVBLocalTimerHandler] m_time_difference is 11
[eDVBLocalTimerHandler] diff is small = not set Linux Time
PATready
use pmtpid 0034 for service_id 3dcd
[AutomaticVolumeAdjustment] service changed
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
eventNewProgramInfo 0 0
have 1 video stream(s) (0214), and 2 audio stream(s) (0334, 0335), and the pcr pid is 0214, and the text pid is 024f
decoder state: play, vpid=532, apid=820
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[AutomaticVolumeAdjustment] service changed
AITready
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[EPGC] start caching events(1581485351)
[AutomaticVolumeAdjustment] service changed
warning, skin is missing element servicename in <class 'Screens.InfoBarGenerics.NumberZap'>
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.NumberZap'>
[AutomaticVolumeAdjustment] service changed
playing 1:0:1:3DD2:640:13E:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3DCD:640:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3DCD:640:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3DD2:640:13E:820000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0217), and 1 audio stream(s) (0352), and the pcr pid is 0217, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=535, apid=850
DMX_SET_PES_FILTER(0x217) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x352) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x217) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:1:3DD2:640:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3DD2:640:13E:820000:0:0:0:
PATready
use pmtpid 0039 for service_id 3dd2
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
eventNewProgramInfo 0 0
have 1 video stream(s) (0217), and 2 audio stream(s) (0352, 0353), and the pcr pid is 0217, and the text pid is ffffffff
decoder state: play, vpid=535, apid=850
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1581485358)
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[EPGC] schedule finished(1581485449)
[EPGC] stop caching events(1581485449)
[EPGC] next update in 60 min
[eDVBLocalTimerHandler] diff is 12
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] no RTC available :(
[eDVBLocalTimerHandler] time update to 06:59:22
[eDVBLocalTimerHandler] m_time_difference is 12
[eDVBLocalTimerHandler] diff is small = not set Linux Time
action ->  InfobarChannelSelection zapDown
playing 1:0:19:10EA:3E8:13E:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3DD2:640:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3DD2:640:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x20701b0
[eEPGCache] remove channel 0x20701b0
allocate channel.. 03e8:013e
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11393000 Pol 1 SR 27500000 INV 0 FEC 9 orbpos 130 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1643 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:10EA:3E8:13E:820000:0:0:0:
allocate demux
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1b, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x20701b0 running
[eEPGCache] channel 0x20701b0 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0213), and 1 audio stream(s) (0348), and the pcr pid is 0213, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=531, apid=840
DMX_SET_PES_FILTER(0x213) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x348) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x213) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
FE_GET_PROPERTY failed (Invalid argument)
[eDVBCAService] new service 1:0:19:10EA:3E8:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:10EA:3E8:13E:820000:0:0:0:
[SEC] sleep 500ms
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
		</enigma2crashlog>
	</crashlogs>
</openpli>

 

Share this post


Link to post
Share on other sites

Nie jestem aż tak prze-biegły w nboxie, ale z GS poradziłem sobie tak jak opisałem.  GS to krytyczny bład systemu. Po nim nastepuje ponowne bootowanie i system wgrywa sie od nowa.

Telnetem wydaj komendę :  df -h   ( sprawdzenie miejsca na dysku a wielkości podane sa w MB) Wielkość przestrzeni dla systemu zwiekszysz  montując partycje SWAP

Napewno masz jakis wolny pendriv. Sformatuj go i podłącz do nboxa i utwórz na nim partycje SWAP. To jest przestrzeń wyłacznie dla systemu.

Dalej. Popraw wentylację - wymontuj tylną ściankę. Nbox pracuje cały czas mimo że dioda swieci w standby i cały cza się grzeje.

Jesli nadal będą GS-y to wymiana kondensatorów.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.